GE IS410STAIS2A / IS400STAIS2AED | Analog Input Module Brand new and original

Overview
The GE IS410STAIS2A / IS400STAIS2AED is an analog input module designed for GE Mark VIe and Mark VIeS control systems. It provides high-accuracy signal acquisition from field transmitters and supports critical turbine, compressor, and plant control applications.

General Information
Part Numbers: IS410STAIS2A, IS400STAIS2AED
Manufacturer: GE (General Electric)
Series: Mark VIe / Mark VIeS
Type: Analog Input Module
Mounting: Rack-based installation
Function: Collects analog signals and transmits digitized data to the controller

Power Specifications
Supply Voltage: Provided through system backplane
Power Consumption: Low-power design (module-dependent)
Input Type: Redundant backplane supply
Protection: Over-voltage, isolation, and channel protection
Indicators: Status and fault LEDs

Communication & Interface
System Interface: Mark VIe I/O network
Input Signal Types: 4–20 mA, ±5 V, ±10 V (model dependent)
Diagnostics: Continuous self-checking, fault detection, channel health monitoring
Configuration: Via ToolboxST engineering tool
Reset Features: Software reset supported

I/O & Channels
Channel Type: Analog Input
Number of Channels: 16 channels
Sampling: High-resolution A/D conversion
Isolation: Channel-to-channel and channel-to-system isolation
Filtering: Digital filtering for noise reduction

Environmental
Operating Temperature: −30 to +65 °C
Humidity: 5–95% RH, non-condensing
Protection Rating: Suitable for industrial cabinet environments

Dimensions & Weight
Dimensions (L × W × H): Approx. 330 × 30 × 180 mm
Weight: ~ 0.5 kg

Factory-certified brand-new products, backed by dedicated support.