Yokogawa ADV869 | I/O Module Hot Items

Overview

The Yokogawa ADV869 is an industrial I/O interface module designed for CENTUM and ProSafe systems. It provides stable signal processing, system diagnostics, and high-reliability operation for process automation environments.

General Information

Part Number: ADV869
Manufacturer: Yokogawa
Series: ADV800 Series
Type: I/O Interface Module
Mounting: Installed within system I/O base or rack
Technology: Signal conditioning, electrical isolation, internal diagnostic logic

Power Specifications

Supply Voltage: Backplane-powered (5 V / 24 V depending on rack)
Power Consumption: < 6 W
Input Source: System backplane
Protection: Overcurrent protection, isolation circuitry
Indicators: LED indicators for module and channel status

Communication & Interface

System Bus: Yokogawa ESB/ICB communication bus
I/O Functions: Supports industrial signal acquisition and transmission
Diagnostics: Continuous module self-check, line fault detection
Operator Interface: Status LEDs and configuration selectors
Reset Features: Software reset via controller or power cycle

I/O & Channels

Channels: Model-specific mixed or dedicated I/O channels
Signal Support: Industrial analog/digital signal types
Isolation: Channel-to-channel and channel-to-system isolation
External Load: Not applicable (module is an interface, not a load driver)

Environmental

Operating Temperature: 0 to +55 °C
Humidity: Up to 90% RH, non-condensing
Protection Rating: IP20 (cabinet-mounted use)

Dimensions & Weight

Dimensions (L × W × H): 130 × 127.2 × 32.8 mm
Weight: ~ 0.3 kg

Authentic factory-sealed items, backed by prompt support.